Yamaha MU100R Sound List page 38

2.2.1.2 System Information bulk dump
This message indicates the contents of the
SYSTEM INFORMATION block (refer to tables
<1 - 1>, <1 - 3>).
This message is transmitted in response to a Dump
Request, but this message will be ignored if it is
received.
2.2.1.3 Multi Effect1 bulk dump
This message sets the MULTI EFFECT1 block
(refer to tables <1 - 1>, <1 - 4>).
2.2.1.4 Multi EQ bulk dump
This message sets the MULTI EQ block (refer to
tables <1 - 1>, <1 - 5>).
2.2.1.5 Multi Effect2 bulk dump
This message sets the MULTI EFFECT2 block
(refer to tables <1 - 1>, <1 - 6>).
2.2.1.6 Unique Effect bulk dump
This messages set the Unique Effect block (refer
to tables <1 - 1>, <1 - 7>).
2.2.1.7 Multi Part bulk dump
This message sets the MULTI PART block (refer
to tables <1 - 1>, <1 - 9>).
2.2.1.8 A/D Part bulk dump
This message sets the A/D PART block (refer to
tables <1 - 1>, <1 - 10>).
2.2.1.9 Drums Setup bulk dump
This message sets the DRUMS SETUP block
(refer to tables <1 - 1>, <1 - 12>).
2.2.2 MU100 native bulk dump (1)
This message modifies parameters unique to the MU100.
Unlike parameter change messages, a single message will
modify multiple parameters.
Exclusive status
11110000 F0H
YAMAHA ID
01000011 43H
N:Device Number
0000nnnn 0NH
01001001 49H Model ID
ByteCountMSB
0sssssss SSH
ByteCountLSB
0ttttttt TTH
0ggggggg GGH Address High
Address Mid
0mmmmmmm MMH
Address Low
0lllllll LLH
Data
0vvvvvvv VVH
: :
0kkkkkkk KKH Check-sum
11110111 F7H End of Exclusive
Details are the same as for 2.2.1 XG Bulk Dump. However,
refer to table 2-n for the address, byte count, and block.
2.2.2.1
This message sets the SYSTEM block (refer to
tables <2 - 1>, <2 - 2>).
2.2.2.2
This message is in MU80 / MU50 data format.
It sets the INTERNAL PERFORMANCE block
(refer to tables <2 - 1>, <2 - 4>).
2.2.3 MU100 native bulk dump (2)
This message sets parameters unique to the MU100. Unlike
parameter change messages, a single message can modify
multiple parameters.
11110000
01000011
0000nnnn
01011001
0sssssss
0ttttttt
0ggggggg
0mmmmmmm
0lllllll
0vvvvvvv
:
0kkkkkkk
11110111
Details are the same as for 2.2.1 XG Bulk Dump. However,
refer to table 3-n for address, byte count, and block.
2.2.3.1
This message sets the INTERNAL PERFORMANCE
block (refer to tables <3 - 1>, <3 - 3>).
2.2.4 VL70-m native bulk dump
This messages set parameters that are unique to the VL
section.
11110000
01000011
0001nnnn
01010111
0sssssss
0ttttttt
0ggggggg
0mmmmmmm
0lllllll
0vvvvvvv
:
0kkkkkkk
11110111
MIDI
MIDI data format
MU100 System bulk dump
MU80, MU50 Internal
Performance bulk dump
Exclusive status
F0H
YAMAHA ID
43H
N:Device Number
0NH
Model ID
59H
ByteCountMSB
SSH
TTH ByteCountLSB
Address High
GGH
Address Mid
MMH
LLH Address Low
Data
VVH
:
Check-sum
KKH
End of Exclusive
F7H
MU100 Internal Performance
bulk dump
F0H Exclusive status
YAMAHA ID
43H
N:Device Number
1NH
57H Model ID
ByteCountMSB
SSH
ByteCountLSB
TTH
Address High
GGH
Address Mid
MMH
Address Low
LLH
Data
VVH
:
KKH Check-sum
End of Exclusive
F7H
37