Setup Menus - Yamaha DX200 Owner's Manual

Setup Menus

When the DX200 Editor is active and selected, the following functions appear in the
Setup menu:
• System Setup
• DX200 Editor Setup
• Transmit DX200 Bulk Dump Data
• Receive DX200 Bulk Dump Data
This opens the Properties dialog for setting the MIDI In/Out of the OMS driver.
• MIDI In
This box is for selecting the MIDI input device. The device corresponds to the DX200's
MIDI OUT is selected here.
• MIDI Out
This box is for selecting the MIDI output device. The parameters of the DX200 Editor are
transmitted to the device selected here. The device corresponds to the DX200's MIDI IN
is selected here.
• MIDI Thru
When this is checked, the MIDI signal received from the MIDI IN will pass through the
device selected with MIDI Out (see above) before being sent to tone generator.
• The names of devices vary with the setup files. Use the setup file appropriate to your system.
• You need the serial port MIDI interface for using the serial port, and the USB MIDI interface for
using the USB port.
• OK
Click this to apply the setting and exit from the System Setup dialog.
• Cancel
Click this to exit the System Setup dialog box without changing the setting.
System Setup
75