Yamaha DX200 Owner's Manual page 10

This function lets you switch back and forth between the current edited condition of the
pattern and its original un-edited condition. This allows you to easily hear and compare
the changes you make to a pattern with its original condition.
z Edit the pattern as desired.
x Select "DX200 Compare."
Click "Edit" on the menu bar, then select "DX200 Compare."
You can also quickly use Compare by clicking any inactive part of the window
pressing control key and clicking "DX Compare" in the pop-up menu.
In the Compare condition, a check appears beside "DX200 Compare" in the menu.
All parameter values are ghosted (in gray) and cannot be edited. Play the con-
nected MIDI keyboard (or click the keys in the DX7 Simulator window) to hear the
original un-edited pattern.
c Select "DX200 Compare" again to return to the edited condition.
Do this as often as you wish to go back and forth between the two conditions.
• "DX200 Compare" is ghosted (gray) and cannot be selected if the pattern has not yet been
edited.
• The Compare function can be used with the parameter in the Main Window and with Tempo
and Swing in the Step Sequencer window.
Compare
10
Operations /
Compare