Edit Tools - Yamaha DX200 Owner's Manual

Edit Tools

Indicates the select point
(along the X-axis, expressed in steps).
Indicates the value (height of the curve
along the Y-axis) at the selected point.
The toolbar at the left of the Free EG window contains the Edit tools. They are divided
into two basic types: the Drawing tools (which include special wave tools) and the Trans-
form tools.
Using the Drawing Tools
1) Click on the desired Drawing tool.
For details on each tool, refer to the descriptions in step #2 below.
2) Hold down the mouse button at the desired start point, and simulta-
neously drag the mouse to draw the curve. Release the button to
stop drawing.
For the pencil tool, the curve is immediately changed. For the other tools, a "ghost"
curve temporarily appears (along with the original one) while you are drawing to
indicate the new curve. Release the mouse button, and after a slight pause, the
newly drawn curve replaces the old one. However, for any area left undrawn, the
original curve remains.
pencil
The "pencil" tool lets you draw the desired curve in freehand.
straight
The "straight" tool lets you draw a perfectly straight line by "pulling" the cursor away
from the starting point.
Parameters /
Indicates the starting point
of the selected range.
Indicates the ending point
of the selected range.
48
Free EG Window