Yamaha DX200 Owner's Manual page 76

DX200 Editor Setup
• "DX200 Editor Setup" can also be selected from the toolbar.
• MIDI Channel
Range: 1 ... 16
This determines which MIDI channel is used for sending DX200 Editor data. Set this to
match the receive channel for the Part you wish to control.
• Device Number
Range: 1 ... 16
This determines which tone generator the DX200 Editor will send data to. This should be
set to same number as the Device Number of the external device. If you have multiple
tone generators in your MIDI setup and each is set to a different Device Number, this
parameter lets you select which tone generator will be affected by the DX200 Editor. If
you are using only one tone generator, this should be set to "1."
• Output when edited
When this is checked, any edits that you make with the DX200 Editor are instantly and
automatically transmitted to the DX200. This ensures that you can audition edits as soon
as you make them.
• OK
Click this to apply the setting.
• Cancel
Click this to exit the DX200 Editor dialog box without changing the setting.
Setup Menus /
76
DX200 Editor Setup