Yamaha DX200 Owner's Manual page 68

Pattern List Combo Box
Select a pattern by clicking on the desired pattern name in the list, and 1 Pattern
Bulk data is transmitted automatically.
• Copying a pattern to another pattern location
1) Set Drag Mode to "Copy."
2) Click the desired pattern and drag it to the desired location. Keep in
mind that this replaces (and erases) the pattern at the location.
• Swapping the location of two patterns
1) Set Drag Mode to "Swap."
2) Click the desired pattern and drag it to pattern you wish to swap it
with. This simply moves the pattern to the selected location; it does
not affect the actual data.
Copy and Swap operations can also be executed from the
log box.
Pattern Init.
Click this to initialize the selected pattern to its
a "blank slate" from which to create a new pattern.
Drag Mode
In the Pattern List combo box, a pattern can be dragged to another pattern location. This
setting determines the result of that operation: whether the pattern is copied to the new
location, or swapped with the pattern at the new location.
Edit Menus /
default parameter
68
DX200 Pattern List
DX200 Librarian dia-
values. This gives you