Adding Times To A Week Program - A.O. Smith SGS - 100 Installation & Service Manual

11
11.7.4 Week program: setting the program-
controlled pump
1. If required, a pump can be controlled during the
period. Use and to set PUMP ON . The pump
ensures a regular circulation of hot water in the hot
water pipes. You can skip this step if you there is
no pump in your hot water circuit.
Confirm with .
The cursor moves to
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP»ON SAVE
2. Confirm with .
The display shown in the figure will appear.
DAY TIME Tset
ON »SU 08:15 75ÉC P
OFF SU 12:45
ON MO 00:00 65ÉC P
OFF MO 23:59
ON TU 00:00 65ÉC P
OFF TU 23:59
3. If you wish, you can use
and change more switch-on times
program: setting the switch-on time")
off times (11.7.2 "Week program: setting the
switch-off time").
4. After changing all desired switch-on and switch off
times, you can start running the week program:
Scroll with to START OPERATION.
Confirm with .

11.8 Adding times to a week program

Call up the menu to INSERT switch-on and switch-off
times into a week program as follows:
1. : WEEK PROGRAM | PROGRAM OVERVIEW.
Confirm with .
WEEK PROGRAM
START OPERATION
^»PROGRAM OVERVIEW
È
66
Main menu
SAVE.
to scroll to another day,
(11.7.1 "Week
and switch-
The display shows the menu for the week
program. The cursor points to the active period.
DAY TIME Tset
ON »SU 08:15 75ÉC P
OFF SU 12:45
ON MO 00:00 65ÉC P
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
2. Scroll to INSERT.
Confirm with .
The sub-menu for adding a period will appear.
ON »SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP ON SAVE
Example
As an example, we will program an extra period in
which the switch-on time is set to 18:00 hours, and the
corresponding switch-off time to 22:00 hours. The
water temperature will be set to 75 °C and the pump
will run continuously.
DAY TIME Tset
ON »SU 18:00 75ÉC P
OFF SU 22:00
ON MO 00:00 65ÉC P
OFF MO 23:59
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
3. Proceed as follows:
a. Set the switch-on time
setting the switch-on
b. Set the switch-off time
setting the switch-off
c. Set the water temperature
program: setting the water
d. Set the program-controlled
pump (11.7.4 "Week program: setting the
program-controlled
5. To activate the week program with the new period
added, scroll down with
START OPERATION and confirm with
gis
(11.7.1 "Week program:
time").
(11.7.2 "Week program:
time").
(11.7.3 "Week
temperature").
pump").
to
.
Instruction manual SGS