Table of Contents
Advertisement
PPS>MAP
STATUS:
BUFFERS.A. =000000 BUFFERF.A. =003fff
DEFAULT BASE = HEX
DEFAULT FILE TYPE = 2flb
PROttTYPE = 27126
PPS>
Comments
Besides showing the current values for the number base and file type, the MA command also
shows the boundaries of the i
S buffer, and the ROM type selected.
With the INITIALIZE command you can specify the default number base, the default file type,
or both.
PPS>I 80
PPS>
Comments
The INITIALIZE command is used in this example to set the default file type to Intel 8080
hexadecimal; the default number base remains at the initial setting of hexadecimal. The file
type parameter sets up the i
S to read and write files of a specified format. If you specify the
wrong file type, an error message is displayed when you try to read or copy a file.
The i
S offers a convenient help feature which displays a description of any i
S command
on the CRT screen.
4-4
Example Programming Session
Advertisement
Table of Contents
