Table of Contents
Advertisement
A: \IPPS
INTEL PROM PRO RAMMIN
SOFTWARE Vx.x
COPYRI HT <years>INTEL CORP
PPS>
Comments
You can locate i
S files on any disk drive. In this example, they are located on drive A. The
i
S prompt (
S>) indicates that the i
S files have been loaded and the host microcomputer
will now execute i
S commands. The version number of the i
S may be different, depend
ing on your version. To return to DOS, enter EXIT and a carriage return anytime following the
i
S prompt.
Apply power to the universal programmer and install a personality module (refer to Chapter 1).
Next, establish the ROM type. Entering the TY E command without parameters gives you a
list of the ROM types that can be programmed with the personality module that has been
installed (in this example, an iU -F27/128 personality module is installed in the universal
programmer).
4-2
Example Programming Session
Advertisement
Table of Contents
