Intel iUP-FAST 27/K-U2 Installation Manual page 7

AUTIONS
his section lists the cautions found in this manual, along with the pages on which they appear.
he PROM ' s pin 1 must be oriented as shown in Figure 3.
PAGE
2
|
caution
, |
he PAL ' s pin 1 must be oriented as shown in Figure 3. 2
Do not overtighten the four hex stand-offs when reassembling the printed cir- 3
cuit board to the front panel. Damage to the printed circuit board may result.
|cAUTIoV|
Do not switch the universal programmer ' s or iPDS system ' s power on or off 6
when a PROM device is installed in a socket of the personality module. Damage
to the PROM device may result.
o
vii/viii