Table of Contents
Advertisement
• Prevent aluminum foil from contacting the
heating elements.
• Do not place pans or trays directly on
the bottom of the oven cavity.
• DO NOT HEAT UNOPENED FOOD
CONTAINERS: A buildup of pressure
can cause the containers to burst.
• DO NOT USE FLAMMABLE
PRODUCTS TO CLEAN THE OVEN.
• Do not clean, rub, damage or remove
the oven door gasket. It is essential for a
good, tight seal during baking and when
the self-clean cycle is engaged. Replace
the oven door gasket if it becomes
damaged or encrusted with food
residue.
State of California Proposition 65 Warning
WARNING
This product can expose you to chemicals including vinyl chloride, which is
known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Do Not Use Water on Grease Fires -
Smother fire or flame or use dry
chemical or foam-type extinguisher.
• Use Only Dry Potholders - Moist or
damp potholders on hot surfaces may
result in burns from steam. Do not let
potholder touch hot heating elements.
Do not use a towel or other bulky cloth.
• Do not stand or sit on the oven door.
• Remove all packing materials and
temporary labels from the oven.
Important Safety Instructions
• ONLY QUALIFIED SERVICE
PERSONNEL SHOULD PERFORM
REPAIRS. Service personnel must
disconnect the power supply before
servicing this unit.
• For SELF-CLEANING ovens:
A) Do not use a protective coating to line
the oven and do not use commercial oven
cleaner unless Certified for use in a self-
cleaning oven..
B) Clean Only Parts Listed in Manual.
C) Before Self-Cleaning the Oven –
Remove broiler pan and other utensils.
CAUTION:
•
FOOD OR COOKING UTENSILS,
ETC., IN OVEN DURING THE
PYROLYTIC SELF-CLEANING MODE
OF OPERATION.
• Record the Model and Serial number on
Page 2 of this booklet. The Model and
Serial number are on the appliance ID
plate. The ID plates are visibly located
on the oven door frame. THE ID PLATE
MUST NOT BE REMOVED.
• BEFORE BAKING FOR THE FIRST TIME,
turn on the oven to burn off any dirt, oil
or grease remaining from the
manufacturing process. Turn the oven on
and set to 450°F(230 °C) for 20 to 30
minutes.
DO NOT LEAVE
7
Advertisement
Table of Contents
