White OMEW Series Repair Instructions page 18

13. Place the end cover (22) on the gear
wheel set and line up the screw holes
14. OMEW series 0 and 1
With a
the bolts. (25)
Tightening torque: 35 - 40 N • m
series 2
With a
the bolts. (25)
Tightening torque: 75 – 80 N • m
Note:
Remember about the new O-ring
Washer dimensions:
•
Series 0 and 1:
•
Series 2:
15. Fit the dust seal ring (3) into place with
a plastic hammer and suit able
mandrel.
Note:
Remember about the new dust seal
16. Mount the woodruff key (10), nut (1),
plastic plugs (26) and washer (2).
Note:
SAE versions do not have washer
WHITE can accept no responsibility for possible errors in catalogues, brochures, and other printed material. WHITE reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are the property of the respective companies. WHITE and the WHITE logotype are trademarks of WHITE Drive Motors & Steering LLC and WHITE Drive Motors and Steering Sp. z o.o..
13 mm socket spanner tightens
OMEW
16 mm socket spanner tighten
8.2 •15.2 •1.6
10.5 • 20 • 2
All rights reserved.
18