White OMEW Series Repair Instructions page 13

4. OMEW series 0 and 1:
key loosen the seven bolts (25) in the end
cover.
OMEW series 2:
loosen the seven bolts (25) in the end
cover.
5. Lift end cover (22).
6. Take out gear wheel set (21) and O-ring
(20).
Note:
Rollers in gearwheel set can fall out.
7. Remove cardan shaft (19).
WHITE can accept no responsibility for possible errors in catalogues, brochures, and other printed material. WHITE reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are the property of the respective companies. WHITE and the WHITE logotype are trademarks of WHITE Drive Motors & Steering LLC and WHITE Drive Motors and Steering Sp. z o.o..
with a h13 mm
with a h16 mm key
All rights reserved.
13