Table of Contents
Advertisement
Symbols used in literature
= Pull out with tool - press fit
= Non removable part, use a new part
= External hex head
= Mark orientation for reinstallation
= Press in - press fit
= Torque specification
= Note correct orientation
OMEW disassembly
1.
To ensure correct assembly/location of
motor parts, provide identification marks.
2.
Remove nut (1), parallel key (10) and
plastic plugs (26).
3.
Fix motor in holding tool SJ 151- 9000-1
and holding plate SJ 9000-14.
WHITE can accept no responsibility for possible errors in catalogues, brochures, and other printed material. WHITE reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are the property of the respective companies. WHITE and the WHITE logotype are trademarks of WHITE Drive Motors & Steering LLC and WHITE Drive Motors and Steering Sp. z o.o..
All rights reserved.
12
Advertisement
Table of Contents
