White OMEW Series Repair Instructions page 17

8. If there is a difference in the spline
length, fit the cardan shaft (19) with
the long-spline end in the output shaft.
Mark the bottom of the cardan shaft
spline that lies adjacent to long tap in
the disc valve.
9. Place the needles in the outer ring and
hold them in place with grease.
Carefully place the distributor plate
(18) on the bearing housing so that the
shaft enters the bearing. Press the
distributor plate until it stops on the
housing and line up the screw holes.
10. Place the greased O-rings (20) in the
gearwheel O-ring recesses. If there is a
recess on one end of the spline hole,
position the gearwheel with recess on
the same side as the smallest screw
hole (stage hole) in the gearwheel rim.
Fit the gearwheel set with this side
facing the housing.
Note:
Remember about the new O-ring
O-ring dimension:
•
Series 0 and 1: 90 • 2 mm
•
Series 2: 92.6 • 2 mm
11. Clockwise revolution (CW)
gearwheel set on the cardan shaft so
that the top of a tooth in the external
teeth of the gearwheel is vertically
over the mark on the cardan shaft.
Turn the gearwheel set
counterclockwise until cardan shaft
and gearwheel engage (15°). Turn the
gearwheel set rim to line up the screw
holes.
12. Counterclockwise revolution (CCW)
Fit the gearwheel set on the cardan
shaft so that the top of a tooth in the
external teeth of the gearwheel is
vertically over the mark on the cardan
shaft. Turn the gearwheel set clockwise
until cardan shaft and gearwheel
engage (15°). Turn the gearwheel set
rim to line up the screw holes.
WHITE can accept no responsibility for possible errors in catalogues, brochures, and other printed material. WHITE reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are the property of the respective companies. WHITE and the WHITE logotype are trademarks of WHITE Drive Motors & Steering LLC and WHITE Drive Motors and Steering Sp. z o.o..
Fit the
All rights reserved.
17