Table of Contents
Advertisement
Caution
Caution
Caution
To replace the IEEE 802.11 Mini PCI card:
1
Complete the steps in
2
Remove the four screws on the bottom that secure the LCD panel hinge to the chassis.
For more information, see
3
Remove the two keyboard screws marked with a K. For more information, see
on
page
21.
4
Remove the thirteen screws on the bottom of the convertible tablet PC. For more
information, see
5
Turn the convertible tablet PC over so the top is facing up.
6
Remove the hinge cover by following the instructions in
on page
16.
7
Remove the keyboard cover by following the instructions in
cover" on page
8
Complete removal of the keyboard by following the instructions in
keyboard" on page
9
Remove the LED panel by following the instructions in
panel" on page
10
Complete removal of the LCD panel by following the instructions in
LCD panel assembly" on page
11
Complete removal of the palm rest assembly by following the instructions in
"Replacing the palm rest assembly" on page
By law, only approved wireless modules provided by Gateway, or a
Gateway authorized representative, explicitly for the Gateway M275
may be installed in this convertible tablet PC.
Legal requirements dictate that a security screw (or other means) be
used to attach the mini-PCI cover plate to the system board in a
manner that restricts end user access. End users are strictly
prohibited from having access to the wireless card. Gateway M275
convertible tablet PCs require a Torx head security screw to attach
the mini-PCI cover plate.
Legal requirements dictate the mini-PCI cover plate be in place during
any and all operation of the convertible tablet PC's wireless feature.
"Preparing the convertible tablet PC" on page
Step 2
on
Step 4
on
page
52.
18.
20.
31.
33.
www.gateway.com
Replacing the IEEE 802.11 Mini PCI card
page
34.
"Replacing the hinge cover"
"Replacing the LED indicator
51.
6.
Step 2
"Replacing the keyboard
"Replacing the
"Replacing the
71
Advertisement
Table of Contents
