Table of Contents
Advertisement
Replacing Gateway M275 Components
12
Loosen the three captive screws from the cooling assembly.
Caution
13
Lift the cooling assembly up and away from the convertible tablet PC.
14
Install the new cooling assembly in the convertible tablet PC.
15
Tighten the three screws that are stamped with the numbers 1 through 3 next to them.
Make sure that you tighten the screws in numerical order.
Caution
16
Reassemble the convertible tablet PC.
62
Screws
There is a thermal pad beneath the cooling assembly on the system
board. Do not remove the thermal pad.
When tightening the cooling assembly's screws into the numbered
holes, tighten them in numerical order.
www.gateway.com
Advertisement
Table of Contents
