Sony HCD-SHAKE33 Service Manual page 6

HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88
Ver. 1.3
Playing music from a Bluetooth device
For a Bluetooth device
1. Press the [ ] button to turn the power on.
\/1
2. Press BLUETOOTH on the unit to select Bluetooth function.
"BLUETOOTH" appears in the display panel.
3. Establish connection with the Bluetooth device.
Press BLUETOOTH on the unit to connect to the last
connected Bluetooth device.
Perform the Bluetooth connection from the Bluetooth device if
the device is not connected.
Once the connection is established, the Bluetooth device name
appears in the display panel.
4. Press N.
Depending on the Bluetooth device,
– you may have to press N twice.
– you may need to start playback of an audio source on the
Bluetooth device.
For an NFC-compatible smartphone
1. Press the [ ] button to turn the power on.
\/1
Touch the smartphone to the N-Mark on the system to establish
the Bluetooth connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
To disconnect the Bluetooth device
For a Bluetooth device
Press BLUETOOTH on the unit.
"BLUETOOTH" appears in the display panel.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
To erase all the pairing registration information perform
COLD RESET test mode (Refer page 17).
6
NOTE OF REPLACING THE COMPLETE MOTHERBOARD
BOARD (SHAKE55: US / SHAKE66: MY / SHAKE88: EA)
The COMPLETE MOTHERBOARD BOARD for this unit has
been changed in the midway of production.
When the COMPLETE MOTHERBOARD BOARD is defective,
check the label model number before repair.
Please order the related type of COMPLETE MOTHERBOARD
BOARD in part list.
Label Model Number
4-487-772-1[]
4-487-772-2[]
4-529-214-1[]
4-529-214-2[]
4-529-215-2[]
4-529-215-3[]
R
AC 120V ~ 60Hz 500W
Contains FCC ID: PPQ-WB115C
Label Model Number
Type
Type A
Type B
Type C
Type D
Type E
Type F