Sony HCD-SHAKE33 Service Manual page 36

HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88
Ver. 1.2
• Note for Printed Wiring Boards and Schematic Diagrams
Note on Printed Wiring Board:
• X : parts extracted from the component side.
• : parts extracted from the conductor side.
• : Pattern from the side which enables seeing.
(The other layer's patterns are not indicated.)
Caution:
Pattern face side: Parts on the pattern face side seen from
(Conductor Side) the pattern face are indicated.
Parts face side: Parts on the parts face side seen from
(Component Side) the parts face are indicated.
Indication of transistor
C
Q These are omitted.
B E
D
Q These are omitted.
G S
Q
B C E
These are omitted.
Q
B C E
These are omitted.
• Abbreviation
AR : Argentina model
AUS : Australian model
E2 : 120 V AC area in E model
E4 : African model
E12 : 220-240 V AC area in E model
E51 : Chilean and Peruvian models
EA : Saudi Arabia model
MX : Mexican model
MY : Malaysia model
RU : Russian model
SAF : South African model
TH : Thai model
HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88
Note on Schematic Diagram:
• All capacitors are in μF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in  and
1 / W or less unless otherwise
4
specifi ed.
• 2 : nonfl ammable resistor.
• C : panel designation.
Note: The components identifi ed by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specifi ed.
• A : B+ Line.
• B : B– Line.
• H : Adjustment for repair.
• Voltage and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : TUNER
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production
tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production
tolerances.
• Circled numbers refer to waveforms.
• Signal path.
: AUDIO
F
: TUNER (FM/AM)
f
N : MIC
J : DVD PLAY
: USB
E
• Abbreviation
AR : Argentina model
AUS : Australian model
E2 : 120 V AC area in E model
E4 : African model
E12 : 220-240 V AC area in E model
E51 : Chilean and Peruvian models
EA : Saudi Arabia model
MX : Mexican model
MY : Malaysia model
RU : Russian model
SAF : South African model
TH : Thai model
• Circuit Boards Location
4CH DAMP board (SHAKE33/SHAKE44)
6CH DAMP board (EXCEPT SHAKE33/SHAKE44)
REGULATOR, SWITCHING (3H401W)
(SHAKE33/SHAKE44),
REGULATOR, SWITCHING (SSNBPR)
(SHAKE55/SHAKE66),
REGULATOR, SWITCHING (SSNGBR)
(SHAKE77/SHAKE88)
BLUETOOTH module
STR board
36 36
TUNER board
(SHAKE44/SHAKE66/
SHAKE88)
VIDEO board
MOTHERBOARD board
MS-476 board
FL board
MIC board
RC-S801/A (WW)