Miller Syncrowave 250 DX Technical Manual page 110

12-8. Conditions That Affect Weld Bead Shape
NOTE
12-9. Electrode Movement During Welding
NOTE
1
TM-359 Page 106
Weld bead shape is affected by electrode angle, arc length, travel speed, and
thickness of base metal.
Correct Angle
Angle Too Small 10
Drag
ELECTRODE ANGLE
Too Short
ARC LENGTH
Slow
TRAVEL SPEED
Normally, a single stringer bead is satisfactory for most narrow groove weld joints;
however, for wide groove weld joints or bridging across gaps, a weave bead or
multiple stringer beads work better.
3
° - ° Angle Too Large
30
Normal Too Long
Normal Fast
2
Spatter
1 Stringer Bead − Steady
Movement Along Seam
2 Weave Bead − Side to Side
Movement Along Seam
3 Weave Patterns
Use weave patterns to cover a wide
area in one pass of the electrode.
Do not let weave width exceed
2-1/2 times diameter of electrode.
Syncrowave 250 DX
S-0061
S-0054-A