Input Select - Yamaha RX-V2700 Owner's Manual

GRAPHIC USER INTERFACE (GUI) SCREEN

Input Select

Use this feature to reassign digital input/outputs, select the
input signal, rename the inputs, or adjust the level of the
signal input at each input source.
Input source
XM
(U.S.A. and Canada models
only)
TUNER
PHONO
CD
CD-R
MD/TAPE
DVD
DTV
CBL/SAT
VCR1
DVR/VCR2
V-AUX or DOCK
PC/MCX, NET RADIO or
USB
MULTI CH
Notes
• Some parameters described above may not be available for all
input sources and some parameters are only available for
specific input sources.
• When iPod is stationed in a YAMAHA iPod universal dock
(such as YDS-10, sold separately) connected to the DOCK
terminal of this unit, "DOCK" appears in the "Input Select"
menu instead of "V-AUX". In such cases, the parameters
marked with asterisk (*) in the above table does not appears in
the input source parameter menu.
• When you select "NET/USB" as the input source, selected sub
input source (PC/MCX, NET RADIO or USB) appears in the
Input Select menu.
94
En
Parameter
Antenna Level
Volume Trim
Rename
Volume Trim
Rename
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
I/O Assignment*
Audio Select*
Decoder Mode*
Volume Trim
Rename
Volume Trim
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
Multi CH Assign
BGV
1
Set the operation mode selector to AMP and
then press SET MENU on the remote control.
The top display appears.
AMP
SOURCE
TV
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
2
Select "Input Select" and then press h.
Stereo/Surround
Input Select
Manual Setup
Auto Setup
3
Select the desired input source (CD, DVD,
etc.) and then press h or ENTER to access
and adjust.
Antenna Level (Antenna level)
Use this feature to check the current reception level of the
XM Passport System connected to the XM jack of this
unit (see page 63). For the best reception, orient the XM
Passport System so that a value of 60% or more is
displayed here.
Display status: None, 0 to 100%
Antenna Level
Volume Trim
Rename
Notes
• "None" is displayed if the XM Passport System is not connected to
this unit. In this case, check the antenna connections (see page 63).
• The "Antenna Level" parameter cannot be adjusted by using the
remote control. Instead, you need to adjust the orientation of the
XM Passport System connected to the XM jack of this unit for a
better percentage of the reception level.
SET MENU
MENU
SRCH MODE
Sound
Video
Basic
NET/USB
Option
CD-R
MD/TAPE
DVD
DTV
CBL/SAT
Antenna Level
100%