Yamaha RX-V2700 Owner's Manual page 103

Yamaha rx-v2700: owners manual
Hide thumbs Also See for RX-V2700:
Table of Contents

Advertisement

4
Press n to select "EDIT" and press ENTER to
access the edit window.
Test Tone
Front L
Front R
Center
The parameter selected in "PARAM" is highlighted.
• Press l / h to adjust the parameter.
• Press k / n to adjust the "Gain".
• Press ENTER to exit the edit window.
y
• When you select "Band" in step 3, you can use this menu
as a graphic equalizer.
• The "Band #1" and "Band #2" can adjust the frequencies
below of 198.4 Hz.
• When you select "Subwoofer" in step 1 and "Band" in
step 3, you can adjust "Band #1" and "Band #2" only.
• For more information on the parametric equalizer, see
page 98.
5
Repeat steps 3 and 4 until you are satisfied
with the results.
y
If you want to reset all "Parametric EQ" parameter settings
for the selected speaker, select "RESET" and press ENTER.
6
Select "EXIT" and press ENTER to exit the
settings window.
Tone Control (Tone control)
Use this feature to adjust the balance of bass and treble
output to your speakers or headphones.
Choices: Control, Bass, Treble, Audio Bypass
Note
Tone Control is not effective when:
– PURE DIRECT (see page 52) is selected.
– MULTI CH INPUT is selected as the input source.
Band
#1
Gain
0.0dB
Freq.
125.0Hz
Q
1.000
GRAPHIC USER INTERFACE (GUI) SCREEN
Control (Tone control)
Choices: Speakers, Headphones
Control
Bass
Treble
• Select "Speakers" to adjust the bass/treble balance of
your speakers.
• Select "Headphones" to adjust the bass/treble balance
of your headphones.
y
"Speaker" and "Headphone" adjustments are stored
independently. The adjustments for "Speaker" affects the
front left/right, center, presence left/right speaker channels
and Subwoofer channel.
Bass (Bass control)
Use this feature to adjust low-frequencies output to your
speakers or headphones.
Choices: 125Hz, 350Hz, 500Hz
Control range: – 6.0 dB to +6.0 dB
Initial setting: 0.0 dB
Control
Bass
Treble
Audio Bypass
Treble (Treble control)
Use this feature to adjust high-frequencies output to your
speakers or headphones.
Choices: 2.5kHz, 3.5kHz, 8.0kHz
Control range: – 6.0 dB to +6.0 dB
Initial setting: 0.0 dB
Control
Bass
Treble
Auto Bypass
Speakers
Headphones
Speaker
Freq : 350Hz
Gain : 0.0dB
+6
+0
-6
Speaker
Freq : 3.5kHz
Gain : 0.0dB
+6
+0
-6
99
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rxv2700blRx v2700 - av network receiver

Table of Contents