Yamaha RX-V2700 Owner's Manual page 148

TROUBLESHOOTING
Problem
The remote control
does not work or
function properly.
The remote control
does not learn new
functions.
HDMI
Error message
Device Over
HDCP Error
Network and USB
Problem
The PC server/MCX-2000/
Internet Radio does not
function properly.
The music in the PC
server cannot be played
back.
Windows Media Connect
2.0 cannot be connected.
The MusicCAST server
cannot be connected.
144
En
Cause
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
The batteries of this remote control and/or
the other remote control are too weak.
The distance between the two remote
controls is too much or too little.
The signal coding or modulation of the
other remote control is not compatible
with this remote control.
Memory capacity is full.
Cause
The number of the connected HDMI
components is over the limit.
HDCP authentication failed.
Cause
The IP address is not set properly.
The network cable is not connected.
The PC does not have Windows Media
Connect 2.0 installed in it.
The music is recorded in a format that
cannot be played on this unit. This unit
cannot play music formats other than
WMA, MP3 and WAV (PCM format).
Also note that it cannot play certain
music files even if these are recorded in
the WMA, MP3 or WAV format.
The music is copyright-protected.
The Windows XP PC is logging on to a
domain.
You are attempting to connect to
MCX-1000. The MusicCAST server that
can be connected by this unit is
MCX-2000.
Auto Configuration is not executed.
Remedy
Program the necessary functions independently into
the programmable buttons using the Learn feature.
Replace the batteries.
Place the remote controls at the proper distance.
Learning is not possible.
Delete other unnecessary functions to make room for
the new functions.
Remedy
Reduce the number of the connected HDMI
components.
Check that the connected HDMI components support
the HDCP copy protection standards.
Remedy
Set the DHCP server function of the router to ON.
Alternately, perform manual configuration
according to the current operating environment.
Connect it properly.
Install Windows Media Connect 2.0 in the PC.
Play music recorded in a format that this unit is
compatible with.
This unit cannot play copyright-protected music.
Log on to the local machine instead of the
domain.
Use MCX-2000 or the PC server.
Execute "Auto Configure".
See
page
122
11
122
—
127
See
page
—
—
See
page
109
30
—
—
—
—
—
79