Technics SD-5948 Operating Instructions Manual page 33

Tape side indicator
L
a
a
DECK 1/2
Tape side indicator
-20 15
DECK © 7
Tape side indicator
| Listening to fapes .
Press DECK 1/2 to select the Deck (1 or 2).
Press 44 or PP.
è The tapes in Deck 1 and Deck 2 can be advanced or rewound at
the same time.
The tape counter indicates the amount of tape travel as a numerical
value based on the number of revolutions of the tape hub.
As you switch between Deck 1 and Deck 2, the tape counter shown
on the display changes too.
To reset the tape counter
Press COUNTER RESET.
The tape counter of the currently selected deck will revert back to
"000", while that of the other deck will remain unchanged.
For your reference:
When the tape is traveling in the reverse direction, the value
displayed on the tape counter will count down.
After "000" is reached, the display will switch to "999" and will
then continue counting down.