Technics SD-5948 Operating Instructions Manual page 22

Listening ees
>
Track number
Disc number
Listening to compact discs
(Only available from the remote control.)
To directly access a specific disc EJ
Press CD.
Press DISC.
{Within 7 seconds]
Select the disc you want with the numeric buttons.
To select a disc from 1 to 9
For example: "6"
To select a disc from 10 to 110
For example: "19"
-_—>
[Within 7 seconds]
Press P.
The changer will start playing the selected disc from the first
track.
For your reference
ə If you press DISC ENTER instead of P to select a disc, the disc
number will be displayed but play will not start automatically.
è When in the stop mode, if you select an empty slot, the message
"NO DISC" will appear on the display.
e While a disc is playing, if you select an empty slot, the changer
will automatically play the next disc available.
è If you select "0", the changer will switch to the single disc play
mode.
To directly access a specific track El
After selecting a disc, select a track with the numeric buttons.
Press the numeric button(s) to select the track.
To select a track from 1 to 9
For example: "6"
To select a two-digit track number 10 or higher
For example: "19" os
Push the button within 7 seconds each other.
Play will begin from the selected track.