Technics SD-5948 Operating Instructions Manual page 19

MEMORY
=F (aye GUARTE LOCK
Lf MHz
Ce QUARTZ LOCK
Ar
gU
Preset channel
| Listening to radio broadcasts |
Manual memory presetting El
The desired broadcast stations can be preset into the desired
channels by the user.
This can also be used as a method for changing selected broadcast
stations that were preset in "Automatic memory presetting".
Set to the desired broadcast.
(Refer to "Direct tuning" or "Sequential tuning.)
If interference or static is keeping you from enjoying an FM
broadcast, press FM MODE and change to monaural. You
can preset the memory in monaural just as in stereo.
Press MEMORY. (Touch only.)
To cancel the memory function, press MEMORY again.
Specify the desired channel to be preset using the
numeric button(s) (completes presetting).
To designate a channel from 1 to 9:
Press the appropriate (1-9) preset-tuning button.
To designate a channel form 10 to 30:
For example "20"
210+ 2-+0
Push the button within 10 seconds of each other.
CERES RESET ESSE SHEED ESET ESE EHHE SESE HASH ESOS SHE SHAEPES HEHEHE HEH HEE HEE HASHES
To continue presetting
Repeat steps 1 through 3.
To listen to preset broadcast stations E3
Specify the preset channel using the numeric
button(s).
To designate a channel from 1 to9:
Press the appropriate (1-9) preset-tuning button.
To designate a channel form 10 to 30:
For example "20"
210 — 2—0
Push the button within 10 seconds of each other.
For your reference
Even if the power is switched to standby or the power cord is
disconnected from the household AC outlet, the memory will retain
its contents for approximately one month.