Technics SD-5948 Operating Instructions Manual page 32

| Listening fo fapes |
Series playback
Both sides of the tape in Deck 1 will be played, followed by both
sides of the tape in Deck 2. (Repeated up to eight times.)
Load the tapes to be played into Deck 1 and Deck 2.
Note that for series playback it is not possible to select different
types of Dolby NR for Deck 1 and Deck 2. It is recommended that
you use two tapes which were recorded using the same type of
Dolby NR (or both recorded without Dolby NR).
Press DOLBY NR to listen to tapes recorded by
Dolby B-type noise-reduction.
Press REVERSE MODE to select the " ©© " mode.
Press DECK 1/2 to select the Deck 1.
Press P.
Series playback will begin from the forward side of the tape
in Deck 1. -
SRSA NAST FA EFF R SOR SPASSRESSHEFPE SE SAE ESRE REESE EASE ESSE SEE TSSPESCHOSEOTCHEOESCOD EOE SS
To stop playback
Press @.
For your reference:
It is also possible to begin series playback from the reverse side of
the tape in Deck 1 or from Deck 2. (Refer to "Reverse function" on
page 31.)