G - Maintenance - Lincoln Electric MODULO MD2 Safety Instruction For Use And Maintenance

8695 8467 / C

G - MAINTENANCE

Please read the manually carefully before you start any servicing work. Maintenance operations may only be carried
out by specialised and qualified individuals. Behaviour that does not comply with the safety instructions provided could
lead to major hazards for personnel and damage to property and/or the surroundings.
Advice for machine users: maintenance is to be carried out as described in the manual.
1. Electrical risks
2. Cutting and abrasion risks in filter area.
Mind the maintenance of the electrical frame. Hazards are indicated by a plate saying "HAZARDOUS
VOLTAGE".
In order to ensure the proper working of the machine, defective spare parts must be replaced with original
spare parts from LINCOLN ELECTRIC.
Introduction
MODULO MD2
All routine and/or exceptional maintenance must be carried out
with the machine disconnected from the supply system.
Before starting up the machine, make sure that the replaced
parts are perfectly installed and that the tools used are removed
from the machine.
Make sure that each safety device is in good condition and
legible.
Hazards relating to rotating impellers: cutting or shearing.
The openings on the machine and its cover allow access to the
rotating impeller after the manifolds or blind flanges are
removed.
Never put your hands or any other object through those openings.
All routine maintenance operations must be carried out by
disconnecting the machine from the electricity supply.
During maintenance work, the operator must wear PPE (protective
gloves, goggles, mask and clothing on the body).
-21