8695 8467 / C
OPTIONAL FILTER CARTRIDGE - W000382775
As an option, depending on the customer's needs, we could supply a welding fume filter cartridge, part number
W000382775, which may be supplemented if needed by a compressed air supply kit.
Installing the filter cartridge:
-
Open the front of the unit MODULO MD2
-
Remove the 355 x 445 x 24mm - W000340600 metal pre-filter
-
Remove the dust recovery container
-
After loosening the first nut, insert the cartridge W000382775 on the threaded rod above the
unclogging mechanism.
-
Fasten the nut, making sure that the cartridge seal is adequately pressed against the bottom of the
MODULO MD2 extraction unit
-
Put back the container, then the metal pre-filter and close the door
MODULO MD2
-13