F - Use; Control Cabinet; Operating - Lincoln Electric MODULO MD2 Safety Instruction For Use And Maintenance

8695 8467 / C

F - USE

CONTROL CABINET

3
2
5
4
The working of the MODULO MD2 extraction unit may either be manual (continuous operation) or automatic
(controlled by the welding machine through a current sensing clamp or external dry contact).

OPERATING

After first connecting the MODULO MD2 extraction unit to the electrical system,
Turn the main switch (1) to I
-
The white Mains power indicator (2) shows that the impeller is connected to the mains and supplied with
power,
Use switch (5) to select the Manual mode for immediate starting or Automatic mode for starting controlled
-
by an external setting.
The green Impeller on button (4) shows that the extraction of the MODULO MD2 unit is in service
-
The pushbutton (3) allows you to start unclogging blasts to clean the filter cartridge when the MODULO
-
MD2 extraction unit has this optional feature.
The MODULO MD2 extraction unit is stopped by moving the selection switch (5) to the Stop position and
-
then setting the main switch (1) to « 0 »
MODULO MD2
1
REFERENCE
1 Padlockable disconnecting switch for CE
2 White Mains power on indicator
3 Unclogging pushbutton
4 Green Impeller on indicator
5
Manual/Stop/Automatic
DESCRIPTION
conformity
Selection switch
-19