Sony Professional BVU-900P Operation Manual page 24

Adjusting video and audio signal levels *
Monitoring audio signals
Video level adjustment
This is automatically adjusted.
Audio level adjustment
Time counter display
To monitor the audio signa! of the desired channel, use the AUDIO MONITOR
selector.
—
AUDIO MONITOR
CH-1 ~«—— To monitor the sound on CH-1
MIX . To monitor the sound on both CH-1
and CH-2 at the same time
CH-2 ~*—— To monitor the sound on CH-2
A lap time, which is determined by counting the number of the pulses derived from
the recorded CTL signal with the CTL/TC/DIAL MENU selector on the control panel
set to CTL, is displayed.
Press the RESET button to reset the display to 0:00:00:00. The lap time from the reset
point to the beginning of the tape is displayed with a minus sign.
¢ Because the figures displayed depend on the number of the CTL pulses counted,
there may be errors in the displayed figures when a tape is played back with
missing CTL pulses.
e There may also be errors in the displayed figures when fast forward and rewind
operations are repeated because CTL signal read errors are likely to occur in those
modes.
¢ The displayed figures will not change when playing back a blank cassette tape
because it does not have the CTL signal recorded on it.
* These adjustments can be made after playback has
started.
23 (E)