Sony Professional BVU-900P Operation Manual page 15

Sub-control panel
This panel is behind the tower half of the control panel. See the next page to view
the sub-control panel.
INT TBC TIME CODE
BYPASS U-BIT
a &
AUTO TIME
pi!) U-BIT/TIME selector
(27) INT TBC selector
CHARACTER
ON
REMOTE-2(24P)
8 (Ti) REMOTE-1 (9P)/
REMOTE-2 (24P)
REMOTE-1(9P) selector
L ey
INT TBC (plug-in time base corrector) selector
This selector is activated when a BKU-903A time base corrector (optional) is installed
in the BVU-900P. Setting of the selector affects the time base corrector operation on
the video signals output from the VIDEO OUT connector of the BVU-900P as follows.
BYPASS: Time base corrector is not utilized.
AUTO: Time base corrector is activated except when a VTR is connected to the DUB
OUT connector ® on the connector panel and the INPUT SELECT switch on the
VTR is set to DUB.
Be sure to supply a reference signal to the REF VIDEO IN connector located on the
connector panel when a BKU-903A is installed.
CHARACTER switch
Normally, set to OFF. Set to ON to superimpose the title characters or the time code
when the unit is in the dial menu operation mode.
@ U-BIT/TIME (user bits/time code) selector
Selects display on the time counter display @ on the control panel.
U-BIT: The user bits will be displayed on the time counter display @ if the CTL/TC
DIAL MENU selector ® on the control panel is set to TC. Set the selector to this
position when checking the user bits data.
TIME: The time code will be displayed on the time counter display @® if the CTL/TC/
DIAL MENU selector ® on the contro! panel is set to TC. Set the selector to this
position when checking the time code data.
REMOTE-1 (9P)/REMOTE-2 (24P) selector
Selects another VTR or another compatible unit to be connected to the REMOTE tor
2 connector.
REMOTE-1: Another compatible unit connected to the REMOTE 1 connector (9-pin)
located on the connector panel is selected.
REMOTE-2: Equipment connected to the REMOTE 2 connector (24-pin) located on he
connector panel is selected.
14 (E)