Clock & Transpose; Clock; Transpose; Message Switch - Yamaha PortaTone PSR-4000 Owner's Manual

CLOCK & TRANSPOSE

CLOCK

Determines whether the PSR-4000 is controlled
by its own internal clock or a MIDI clock signal
received from an external device.
normal setting when the PSR-4000 is being
used alone. If you are using the PSR-4000 with an
external sequencer, MIDI computer, or other MIDI
device, and you want the PSR-4000 to be synchro-
nized to the external device, set this function to
. In the latter case, the external device
must be connected to the PSR-4000 MIDI IN con-
nector, and must be transmitting an appropriate
MIDI clock signal.

TRANSPOSE

When the
is turned , the PSR-4000 transpose settings are
not applied to transmitted MIDI data. When turned
, the PSR-4000 transpose settings apply to trans-
mitted MIDI data in the same they do to notes played
on the PSR-4000 itself. When the
parameter is turned
ceived by the PSR-4000 is not transposed, and when
set to the received note data is transposed ac-
cording to the current PSR-4000 transpose setting.
A check mark appears in the
or box when the corresponding
parameter is .

MESSAGE SWITCH

START/STOP

The
MIDI transmission of MIDI start and stop com-
mands corresponding to starting or stopping the
PSR-4000 accompaniment or song play/record func-
tions or . The
parameter turns MIDI reception of MIDI start and
stop commands generated by external equipment
or . A check mark appears in the
when the corresponding parameter is
.........................................................................................................................................................
is the
parameter
note data re-
...................................................................................................................................................................
parameter turns
or box
.
F8: MIDI
117