The Easy Edit Parameters; Edit; Name; Pan - Yamaha PortaTone PSR-4000 Owner's Manual

Use the [ ] and [
pages. Use the and
The LCD button can be used during editing to compare the sound of the original voice with the edited
voice.

EDIT

NAME

........................................................................................................................................................................................................
A name of up to 12 characters can be entered for
each custom voice. Use the < > LCD [ / ]
control to move the name cursor to the various
character positions, then use the
LCD [ / ] control to select the required
character for each position. The
control selects capital letters, the
control selects lowercase letters, and
the LCD [ / ] control selects numbers
and special characters.

PAN

....................................................................................
The LCD [ / ] control can be used to
position the voice in the center of the stereo sound
field, or to the left or right in 10 steps.
NOTES
• Depending upon the selected DSP EFFECT type, some
PAN parameters may not function.

VIBRATO

......................................................................
Use the ,
] controls to set up the vibrato effect.
produces a delay between the time a key is pressed
and the beginning of the vibrato effect. "0" is the
preset value for all parameters. "+" settings increase
while "–" settings decrease the range of the effect.

The Easy Edit Parameters

] LCD buttons to the right of the display to select the
buttons to the left of the display to select the various parameters within each page.
, or
LCD [ / ]
LCD [ / ]
and LCD [ /
Custom Voice Edit
and display
TIME
79