Exclusive; Transmit; Transmit Monitor; Channel - Yamaha PortaTone PSR-4000 Owner's Manual

F8: MIDI

EXCLUSIVE

The
MIDI transmission of MIDI exclusive data (voice
and setup data)
parameter turns MIDI reception of MIDI
exclusive data generated by external equipment
or . A check mark appears in the
when the corresponding parameter is
This display page allows you to specify which PSR-4000 voices and parts will be transmitted via which MIDI
channels (there are 16 MIDI channels), and to specify which types of data will be transmitted for each channel.

TRANSMIT MONITOR

The
the top of the display indicates when data is being
transmitted on any of the 16 MIDI channels: The
dots corresponding to each channel (1 ... 16) flash
briefly whenever any data is transmitted on the
channel(s).

CHANNEL

Use either the
of the display, or the
select the channel to which you want to assign a part
or change a data switch setting. The channel num-
bers are show in the leftmost column in the display.

PART

The
or part which will be transmitted via the currently
selected channel. Only one voice or part can be
specified per channel. Any of the parts listed below
can be selected. If one part is assigned to multiple
channels, only the lowest-numbered channel will be
used.
118
parameter turns
or . The
or
(transmit monitor) at
and LCD buttons to the left
LCD [ / ] control to
LCD [ / ] controls select the voice
box
.

TRANSMIT