The Freeze Function; The Freeze Group Settings - Yamaha PortaTone PSR-4000 Owner's Manual

Registration Memory
If you press the [FREEZE] button so that its LED lights, selecting a
different registration setup will not change the settings specified in the

The Freeze Group Settings

You can specify which settings are affected by the FREEZE function via the FREEZE GROUP SETTING
function accessible via the registration
FUNCTION display — page 114.
Z
Select the FREEZE GROUP SETTING Function
Press the
pears when a BANK button or the [MEMORY]
button is pressed before it disappears. When the
easy setting display appears, select the
sponding LCD button.
X
Mark the Settings to be "Frozen"
Use the
to select a setting you want to freeze or "un-freeze",
then use the
remove the check mark for that setting. Repeat until
all settings are marked or un-marked as required.
C
Exit When Done
Press either the
[EXIT] button when done.
46

The Freeze Function

display accessed either via the registration
display or the [FUNCTION] button (page 114).
LCD button that ap-
function by pressing the corre-
LCD [ / ] controls
LCD [ / ] control to set or
.............................................................................................................................................................................
LCD button or the panel
display. The same function is also available via the
........................................................................................
.....
FREEZE MEMORY
BANK 1~16
+ 1
–
2