...........................................................................................................................................................................................

The QUANTIZE function aligns recorded notes

in a specified part to the specified beats to "tighten

up" the timing of a performance.

Select a Part

Use the

LCD [ / ] controls to select the

part to be quantized, and the

controls to select the beats to which the notes will be

aligned.

The part name for parts which are being used

unedited from a preset style will appear in small

letters. " " will appear for parts which contain no

data. Neither can be selected for quantization.

Quantize the Part

Press the

display will appear briefly when the quantize opera-

tion has finished. After quantization the

button changes to an

used to undo the quantize operation if the results are

not satisfactory.

COPY

........................................................................................................................................................................................................

This function allows data to be copied from one measure or group of measures to another location within the same

part.

Select a Part

Use the

LCD [ / ] controls to select the

part to be edited.

The part name for parts which are being used

unedited from a preset style will appear in small

letters. " " will appear for parts which contain no

data. Neither can be selected for editing.

] or [

] LCD button to the right of the display. If not already selected, press