Direct Tuning.21 - Technics SA-AX730 Operating Instructions Manual

Listening to radio broadcasts
TUNER/
BAND
/_
n/i
i i
/
/__/
tint \
:r u: X DU
-W-vi
Selected band
DIRECT TUNING/
DISC ENTER
t_ n /i
i i i
-i V
12 3
ooo
606
6666
ouuimocK
(TERCO
/_ fl/T
/ / /
/ / / //_///
/ /_/ /, _/
u
,
Direct tuning
by remote control only
Specify the frequency using the numeric buttons on the remote
control to directly tune to the desired station.
il
Press [TUNER/BAND].
This will set the remote control to operate the tuner.
The selector on the receiver will change to "TUNER".
Each time the button is pressed, the band will change as
follows,
FM ^ AM.
Press [DIRECT TUNING/DISC ENTER].
El
While cursor display is flashing (approx. 10 seconds)
Press the numeric buttons to enter the
frequency.
If the desired FM frequency is 107.90 MHz, press
□]—»(Z1—*ilJ—
If the frequency has been input correctly, the displayed
frequency will blink once.
tm
1. If no button is pressed while the cursor display is flashing,
the display will return to the frequency which is currently
being received. To re-specify the frequency, repeat the
procedure from step 2.
2. If the frequency has not been input correctly, "ERROR"
will be displayed. In this case, re-enter the frequency.
c