Listening To Radio Broadcasts.20; Sequential Tuning.20 - Technics SA-AX730 Operating Instructions Manual

band:
FM MODE
Listening to radio broadcasts
Sequential tuning
Use the tuning buttons to tune-in radio stations.
D Turn [INPUT SELECTOR] to select "TUNER".
B Press [BAND] to select "FM" or "AM".
B
Press [TUNING
(v
or
A)]
to tune to the
desired frequency.
"QUARTZ LOCK" lights up when tuned.
"STEREO" lights up when an FM stereo broadcast is
received.
To make an automatic search for stations
If [TUNING (V or A)] is held down for an instant until the
frequency begins to scroll, the broadcast stations are tuned
in automatically when one is found.
Tuning may stop automatically if any jamming is
encountered.
If noise is excessive in the FM stereo mode
Press [FM MODE].
("STEREO" will go out, and "MONO" will light up)
The broadcast will be monaural, but noise wifi be reduced.
If the button is pressed once more, the stereo mode resumes.
For your reference
The tuner can pick up interference from DVD players. If this
occurs turn the DVD off.
To change the AM frequency step
Press and hold [BAND] for about 3 seconds when AM band is
selected. (The frequency step changes from 9 kHz to 10 kHz per
step.)
To return to the previous step, press and hold [BAND] for about 3
seconds again.
RQT4774