Sfc (Sound Field Control).29 - Technics SA-AX730 Operating Instructions Manual

2
STEREO SURROUND 3 STEREO SFC
0 O O -O-
O!
3
MODE
Selected SFC mode
• - . •
■?* '
> - • . r' u* s'.'-'-'-■■ •
♦- ••■.. 'v
**#.v::' ;'
.T.T» :;
): ■' ■:
SFC
(Sound Field Control)
$
The SFC function gives presence and spread thereby enhancing
and enriching the music or movie,
Read the following explanations in order to better understand how
to make your selection.
BBBi
The center speaker is not used in the hall, and simulated modes
HALL
This mode imparts a reflection and spread which will make you
feel as if you are in a large concert halt.
CLUB
Like a jazz club, this mode provides an exciting and intimate
atmosphere. It simulates the sound field of a relatively small room
having a low ceiling and hard reflective surfaces, for a "live" sound
with enhanced presence to bring the performers up close
LIVE
Primarily for vocal pieces, this mode adds gloss to the vocals and
you'll feel as though you were hearing a live stage performance
THEATER
You can clearly perceive the directions and source of the movie.
Real ambience of sound can also be recreated naturally using this
mode.
THEATER mode can be used with stereo sources not encoded
with Dolby Surround.
When using Dolby Surround encoded materials select
"SURROUND".
SIMULATED (SIM SURR)
Choose this mode if little or no sound will be heard from the
surround speakers.
You can feel as if you were in a more expanded space adding to
the actual sound from the source.
"iuue diso aaus eneci to monaural sources by outputting
sound from surround speakers.
Ensure the front speakers are connected to the A terminals and
"SPEAKERS A" is selected.
■■ Turn [INPUT SELECTOR] to select and start
the desired source.
E Turn the sound mode selector to select
"SFC".
Turn [MODE] to select the desired SFC mode.
The SFC mode can also be selected by directly turning [MODE] in
step 2 instead of selecting "SFC".
For your reference
You can set the SFC mode for each source.
Each source will retain the selected mode.
To turn off the SFC function
Turn the sound mode selector ((a)) to select "STEREO".
Note (SA-AX730 only)
These modes cannot be turned on while "SPEAKERS B" is on.
These modes will also be automatically canceled and the modes
in the memory for all sources will be cleared. The modes must be
selected again for all sources when SPEAKERS B is turned off
again.
RQT47