Dvd 6Ch Input Mode.31 - Technics SA-AX730 Operating Instructions Manual

DVD 6CH INPUT mode
Use this mode when playing back 6 channel discrete sources such
as Dolby Digital. To use this mode connect a DVD player, digital
surround processor or any other component that has 6 channel
discrete output capabilities («♦ Page 9, 11).
Dolby Digital and other 6 channel discrete sources are recorded
with each speaker channel discrete from the other. Depth,
movement, position and other characteristics are maintained, so
using this mode will make you feel as if you were at the movie
theater when in your own home,
In the DVD 6CH INPUT mode, if sound is not produced from the
center speaker, surround speakers or subwoofer, check speaker
setup of the DVD player or digital sound processor connected to
the receiver.
Ensure the front speakers are connected to the A terminals and
"SPEAKERS A" is selected.
Turn [INPUT SELECTOR] to select "DVD".
Press [DVD 6CH INPUT] to select "DVD 6CH".
Changes as follows, each time the button is pressed.
DVD 6CH DVD (2CH)
The "DVD 6CH INPUT" indicator lights when "DVD 6CH" is
selected.
If you press this button while another source (CD, PHONO,
etc.) is selected, the receiver switches the source to DVD
and engages the DVD 6CH INPUT mode.
Bl Start the desired source.
Follow your equipment's operating instructions.
rwEi
You cannot select Dolby Pro Logic mode while in the DVD 6CH
INPUT mode.
This mode cannot be turned on while "SPEAKERS B" is on. This
mode will also be automatically canceled and the modes in the
memory for all sources will be cleared. The modes must be
selected again for all sources when SPEAKERS B is turned off
again.
ROT47