Table of Contents
Advertisement
Using Audio/Video Dubbing
W
s
^sJ
Use audio/video dubbing to record audio and video from the camcorder's built-in microphone and
camcorder onto a previously recorded tape in the camcorder.
Hold down the small button on the CAM/
OFF/VIDEO switch while sliding the switch to
VIDEO.
2 Insert a previously recorded tape in the cam-
*" corder.
'I Use the wireless remote control and press the
° PLAY button. Use the PLAY, F.FWD, and REW
buttons to find the place where you want to stop
dubbing.
A Display the linear time counter with memory
("Using Memory," p44). Press the COUNTER
RESET button to set the linear time counter to
"0:00:00M".
C Use the REW and PLAY buttons to find where
you wish to start dubbing.
£ Place the CAM/OFF/VIDEO switch to CAM
position.
The record pause indicator "•!!"
appears and the camcorder is ready to record.
H Press and hold the A./V DUB button, then press
PLAY. This places the camcorder A/V DUB
pause mode.
"®ll" disappears replaced by
"A/V DUB
II .
Q Press the Start /Stop button on the camcorder or
START/STOP (PAUSE) on the remote control.
The audio/video dubbing starts. When the lin¬
ear time counter reaches "0:00:00M" the cam¬
corder stops automatically, recording only the
portion of the tape that you selected.
Note; If the camcorder is in AV DUB pause or
STILL mode for more than 5 minutes, the cam¬
corder stops automatically to protect the tape,
Note: When the audio/video dubbed portion is
played back, noise may appear at the end of
the dubbed portion.
VM-D965LA/VM-D865LA
£53
Advertisement
Table of Contents
