Operating Your Camcorder; Range In Which The Lcd Monitor Can Be Moved - Hitachi Digital 8 VM-D965LA Instruction Manual

Table of Contents

Advertisement

Operating Your Camcorder
Use the wireless remote control to operate the camcorder from a distance. The PLA V
5 -
PAUSE (START/STOP) and ZOOM buttons on the wireless remote control operate the functions of the cor¬
responding buttons on the camcorder
,
Aim the wireless remote control ar the infrared receiver of the
camcorder.
Note: Use the wireless remote control within the
range of the infrared receiver of the cam¬
corder shown above.
Note:
The wireless remote control may not
function in strong light such as direct sunlight or
very bright artificial lighting.
Note: Clear a direct path from the wireless
remote control to the infrared receiver. The
wireless remote control won't work if an ob¬
stacle blocks the infrared rays.
Note: The remote control code of this cam¬
corder is Hitachi code VCR2, if you have a VCR
with the same code your Hitachi VCR may mal¬
function when you use the camcorder's wire¬
less remote control.
LCD Monitor
mm m
m.m
When using the LCD monitor during recording and playback, you can adjust the brightness of its screen
and the angle of the monitor.
• Opening
the
LCD Monitor
decrease it. After 5 seconds, the adjustment dis-
,
,
T __
.
play will automatically disappear,
j Press the OPEN button to open the LCD mom-
r }
_
^
Note:
Opening or dosing the LCD monitor
""
' DhfeC'o
switches the picture to appear on the LCD
monitor or in the viewfinder.
j
U
OPEN Button
• Adjusting the Brightness of the LCD
Screen
Note: Even when the picture on the LCD moni¬
tor is adjusted, the recorded video will not
change,
•| Load the battery. ("Camcorder Power Sources",
1 p20.)
fj Press the small button on the CAM/OFF/
VIDEO switch as you slide it to CAM or VIDEO.
IUAW
r
CAM/OFF/VIDEO-Tf
']
Switch
d Use the brightness control buttons to adjust the
J brightness of the LCD screen. When either but¬
ton is pressed, the brightness control display
will appear on the LCD monitor for about 5 sec¬
onds. Press A to increase brightness, or Y to
E14
Bright Control Buttons
0
:
00:55
'ISiWWK'
! Range in which the LCD Monitor
can be moved
jjF
Viewed from Side m
HITACHI

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital 8 vm-d865la

Table of Contents