Ii-2. Connection - Edimax GS-5424LX Quick Installation Manual

II-2. Connection
1. Power on: Connect the power cord to the switch and the power outlet. The
switch is powered by the 100-240VAC 50/60Hz external high- performance
power supply. (Note: Make sure the PWR LED is green.)
2. Uplink: Plug the SFP/SFP+ cable into the SFP/SFP+ slot no. 25~28 and
connect it to another switch. (Note: Make sure that the LED is blue or
green.) Or plug the standard Cat5e or above Ethernet cable into a LAN port
of another switch. (Note: Make sure that the "LAN" LED is green or amber.)
3. Connect devices: Plug the standard Cat5e or above Ethernet cable into the
LAN port and connect to any networking device with an Ethernet port.
(Note: Make sure that the "LAN" LED is green or amber.) The hardware
installation is complete!
4. Connect a computer: Connect your computer with the switch and get ready
for web-based configuration with following "Section III Web-based
Configuration Utility".
1. Power on
4. Connect a
computer
3. Connect devices
2. Uplink
4