Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
the container. Then press
net indication "▼" is off.
The total tare value (tare value + pre-set tare value) can equal the full capacity of the
indicator.
2-4 Pretare Function
1. When the weight of the container is known (
Press
key and the display shows
and
keys to input weight value of the container. After finishing the procedures, the
net indication "▼" and pretare indication "▼" is on.
Place goods into the container, then the indicator shows the net weight of goods.
Clear pretare value
Press
key, input 00000 and then press
When the indicator returns to zero, net indication "▼" and pretare indication "▼"are off.
In Tare mode, the Preset tare function is disabled.
The indicators with two weighing ranges can NOT pre-set the tare value larger than
the first weighing range.
2-5 Net/Gross Function
When we set tare or pre-tare values, Net indication "▼" will be light on. At this time, Press
key to switch between Net / Gross weight and the indication behave accordingly.
All key are disable except
2-6 Backlight Function
Press and hold
connected to LOCK to enter into backlight function. Press
backlight modes:
.
.
.
key to clear tare value. The indicator returns to zero and
and
key for over 2 seconds in weighing mode and the SWA1 is
.
、
⇒ "Auto Backlight" mode. When the weight is over 10d or any key
is pressed, the display backlight will be switched on. When the
weight returns to zero (the weight on platform is less than 10d),
the display backlight will be switched off after 10 seconds.
⇒ Display backlight is on all the time.
⇒ Display backlight is off.
)
.
key to clear pretare value.
in gross indication mode.
.
、
7
. Use
key to select the three
.
Advertisement
Table of Contents
