Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
CHAPTER 2 GENERAL OPERATION
DESCRIPTION
2-1 Totalizing (Print)
The totalizing function is valid when
1. Weight Totalizing
Place goods on the platter, after stable and press
Then the display shows the total number of additions and the totalized weight value.
The indicator will recover to show the weight value of the goods on the platter after 3
seconds.
The indicator allows the next totalizing operation, even when the weight value returns back
to zero. The
key is functional, when the weight value changes by more than 10d. The
indicator will save the totalized weight value after the weight is stable.
The indicator can totalize positive or negative weight but can't do both at the same time.
The totalized weight data must be reset to zero before it is possible to select positive or
negative totalizing mode.
The totalizing function can be used up to a maximum of 999 times before it must be reset.
The totalizing display is limited to 6 digits maximum.
When totalizing, RS-232 and Mini Printer will also output. ( Refer to F5 setting)
2. Clear Totalized Weight Values
♦ When the indicator's reading shows zero, press
values from the memory.
♦ The indicators will automatically clear all the weight values from the memory after
turning off.
2-2 Zero Function
When indicator shows small reading without loading (zero drift phenomena), press
key to re-zero, zero indication " ▼ " is on.
2-3 Tare Function
1. When the tare weight / container weight is unknown (
Place the container on the platter, after stable and press
returns to zero and net indication "▼" is on.
Place goods into the container, then the indicator shows the net weight of goods.
Clear tare value
When removing the container and goods, the display shows the negative weight value of
is set for
key to save the weight value.
key twice to clear all the weight
)
6
,
,
,
,
.
key, the weight value
Advertisement
Table of Contents
