Weight Hold Mode Setting - Excell FWH3 Service Manual

EXCELL PRECISION CO., LTD.
3-9 Weight Hold Mode setting ⇒
Under hold mode, press
(Select proper baud rate according to receiver and F5 transmission mode does not
affect)
(Refer to F5 for details of transmission rate)
♦
Please make sure MINI JUMPER of SWA1 is connected to ADJ on PC board before
setting. Please make sure MINI JUMPER of SWA1 is connected to LOCK on PC
board after setting.
Press or
Press key
Press key
Press key
Press key
Press key
Press key
key to print the hold value showed.
key to select F8 function ⇒ the display shows
Press key in order and the display
shows accordingly
Select required hold mode and then press
key to finish setting.
~
24