Audi A8 2018 Owner's Manual page 106

A ss is tance s y s tem s
- For safety reasons, active lane assist must
not be used when there are poor road and/
or weather cond itions such as slippery
roads, fog, gravel, heavy rain, snow and the
potent ial for hydroplaning. Using act ive lane
assist under these conditions may increase
the risk of a crash .
Switching on/off
Applies to: veh icles with Audi active lane assist
•
Fig. 11 4 Turn signal lever: butto n for active lane ass ist
Fig. 11 5 Winds hield : came ra window for act ive lane ass ist
"' Press the button to switch the system on and
off <=> fig. 114 . The . or . indicator light in
the instr ument cluster turns on or off .
Indicator light s
•
Ready: the indicator light turns on when the
system is ready for use. The system can now be
operated .
•
Not ready: the indicator light turns on if the
system is switched on but is inoperab le. This may
be due to the following reasons:
- There is no lane marker line.
- The relevant lane marker lines are not detected
(fo r example , mark ings in a construction zone
104
or because they are obstru cted by snow, dirt,
water or lighting).
- The vehicle speed is below the activation speed
of approximate ly 40 mph (65 km/h).
- The lane is too narrow or too wide.
- The curve is too narrow.
- The driver's hands are not on the steering
wheel.
@
Tips
Make sure the camera's field of view
<=>
fig. 115 is not obst ructed by sticke rs or any-
thing else. For information on cleaning, see
<=> page 306 .
Image in the instrument cluster display
Applies to: vehicles with Audi active lane assist
Fig. 11 6 Inst rumen t cluster: act ive lane assist is switched
on and provid ing warn ings
Fig. 1 1 7 Ins trume nt clust e r: act ive lane ass ist is switched
on but not ready to provide warn ings
You can call up the active lane assist display us-
ing the buttons in the mu ltifunction steering
whee l ¢ page 12. .,..