GPS holder
Removing the GPS holder
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
hard drive
or
SSD
c.
base cover
d.
optical drive
3.
To remove the GPS holder:
a. Disconnect the antenna cable and unroute it from the GPS holder [1].
b. Disconnect the GPS holder cable.
c. Remove the screw that secures the GPS holder to the computer [2].
d. Lift the GPS holder from the computer [3].
Installing the GPS holder
1.
Insert the GPS holder into the slot on the computer.
2.
Tighten the screw that secures the holder to the computer.
3.
Connect the antenna cable and the GPS holder cable.
4.
Install the:
a.
optical drive
b.
hard drive
or
SSD
c.
base cover
d.
battery
5.
Follow the procedure in
44
Before working inside your
After working inside your
computer.
computer.