d. Disconnect the other USH daughter board cable connectors [ 5, 6]
e. Remove the USH daughter board from the computer.
Installing the USH daughter board
1.
Connect the USH daughter board connector cables at the bottom of the USH daughter board and
turn the board over.
2.
Align the USH daughter board with the slot on the computer.
3.
Install the screws that secure the USH daughter board to the system board.
4.
Connect the USH daughter board connector cable on top of the USH daughter board.
5.
Install the:
a.
ExpressCard
b.
base cover
c.
hard drive
or
SSD
d.
battery
36